Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST.CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed. Hardware List Parts List P' .... � � / / #1 x 4PCS Left Side Frame @al .... #2 x 1PC Right Side Frame #3 x 1PC Support Bar 1 #4 x 1PC "' Support Bar 2 #5 x 1PC "' l Support Bar 3 #6 x 1PC Support Bar 4 / c::J #7 x 1PC Support Bar 5 #8 x 1PC Back Panel #9 x 1PC � Seat Panel .. " .. " .. ..
Exploded View #2 ASSEMBLY Do not fully tighten all bolts until assembly is complete. This will help all parts to assemble properly. #7 \ Insert the support bars (#3,4,5,6,7) to the right side frame (#2) as shown in the diagram. #5 #4 \ Page 4 of 7
1) Secure support bars (#3,4,5) to right side frame (#2) by using bolts (#A) with washers (#C,D). #A @)11111 #C @ 6PCS @) 5PCS #D #E 2) Secure support bar (#6) to right side frame (#2) by using bolts (#A) with washers (#C,D). 3) Secure support bar (#7) to right side frame (#2) by using bolts (#A) with washers (#D). Align and insert left side frame (#1) to the support bars as shown in the diagram.
3) Secure support bar (#7) to left side frame (#1) by using bolts (#A) with washers (#C). 1) Secure support bars (#3,4,5) to left side frame (#1) by using bolts (#A) with washers (#C,D). 2) Secure support bar (#6) to left side frame (#1) by using bolts (#A) with washers (#C,D). Align seat panel (#9) to the holes of the support bars (#3,4), then secure by using bolts (#A) with washers (#C,D).
Align back panel (#8) to the holes of the side frames (#1,2). Secure by using bolts (#B).
