Installation & Assembly

5 OF 8
Place Support Bar (C) to the housings of Table Top (A) secure by using the Bolts
(①) with Washer (⑧), and Allen Key (⑨) as show in picture above.
Repeat the same process with the other Support Bar (C)
Do not fully tighten the Bolts
Secure Table Top (A) using the Bolts (④), Sleeve Nut (6) and Allen Key (⑨) as
shown in the picture.
Do not fully tighten the Bolts.
4
4
9
9
6
6
1
8
9
C
A
C
A