Owners Manual

Smooth Fixture Lead
Wire Connector
Black Supply Wire
Ground Wire
Ribbed Fixture Lead
White Supply Wire
Post
Screw
Top Body
Glass Card
Ball Nut
Stud
Screw
Bulb
Glass
Body
PLEASE READ THE ASSEMBLY INSTRUCTION SHEET CAREFULLY BEFORE PROCEEDING. Carefully unpack
and identify all parts prior to building the unit. Each part is identied on the drawing for reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection, you must return the item for any
reason. Please repack the unit using the original carton and inserts.
ITEM NO: 60-6513
STEP 1: Unpack all the parts and classify them
according to the illustration shown. Place the
parts on a scratch free surface.
STEP 2: Put the glass into the xture. Install
the bulb (included).
STEP 3: Attach the cover to the body, x it with
the ball nuts.
STEP 4: Make sure the power is turned off at
the main power cable where the xture is to be
installed. Use the wire nuts to connect the positive
and neutral wires, connect the ground wire to the
junction box ground port.
STEP 5: Secure the xture to the post tter using
the screws.
STEP 6: Turn on the power at fuse or circuit box.
ASSEMBLY AND MOUNTING INSTRUCTIONS
CAUTION:
To reduce the risk of re, use the specied lamp wattage (or smaller) and bulb type identied on the product.
CLEANING INSTRUCTIONS:
Do not use polish or cleaners on your product. Just wipe clean with a soft cloth.
CAUTION – RISK OF FIRE
This product requires installation by a qualied electrician. Before installing be sure to read all instructions
and TURN THE POWER TO THE ELECTRICAL JUNCTION BOX OFF.
ITEM NO: 60-6513
ARTÍCULO Nº: 60-6513
ARTICLE N°: 60-6513