Assembly Instruction

Put the Headboard onto a flat

surface.

Align the mounting position on

Headboard to the mounting

position on Left Support

Leg(P2).

Then, lock the top and the

middle mounting positions by

Flat washer (H3), Spring

washer(H2), bolt(H1), Then

tighten the bolts with allen

wrench (H4) .

Repeat the same steps to install

the Right Support Leg(P3).

At this point of assembly, DO

NOT overfasten the connections.

The final height of the

Headboard may be adjusted to

your own need.

Step 3 . Headboard is ready to be assembled to bed frame using Pack B Parts.

Step 2