Assembly Instruction

ASSEMBLY INSTRUCTION

PARTS NAME QTY

Headboard

Left Support Leg with

3 Mounting Brackets

(With the sticker "Left"

on the bottom)

Right Support Leg with 3

Mounting Brackets ( With the

sticker "Right" on the

bottom)

H1 Bolt M8X25mm

H2 Spring Washer

H3 Flat Washer

H4 Allen Key

H5 Bolt M8X25mm

H6 Spring Washer

H7 Flat Washer

H8 Nut Cap

H9 Solid Wrench

Headboard

DRAWING

Step 1 . Take out Legs and hardware under the headboard

Step 2

PARTS #

Pack A

( Used

assemb

le the

headbo

ard )

Pack B

(assem

ble the

headbo

ard to

the bed

frame)

PAGE 1
ASSEMBLY INSTRUCTION Headboard PARTS # PARTS NAME P1 Headboard Left Support Leg with 3 Mounting Brackets (With the sticker "Left" on the bottom) Right Support Leg with 3 Mounting Brackets ( With the sticker "Right" on the bottom) P2 P3 Pack A ( Used to assemb le the headbo ard ) Pack B (assem ble the headbo ard to the bed frame) DRAWING 1 1 1 H1 Bolt M8X25mm 4 H2 Spring Washer 4 H3 Flat Washer 4 H4 Allen Key 1 H5 Bolt M8X25mm 5 H6 Spring Washer 5 H7 Flat Washer 5 H8 Nut Cap
PAGE 2
Step 2 H3 P2 P3 H2 H1 H4 Put the Headboard onto a flat surface. Align the mounting position on Headboard to the mounting position on Left Support Leg(P2). Then, lock the top and the middle mounting positions by Flat washer (H3), Spring washer(H2), bolt(H1), Then tighten the bolts with allen wrench (H4) . Repeat the same steps to install the Right Support Leg(P3). At this point of assembly, DO NOT overfasten the connections. The final height of the Headboard may be adjusted to your own need. Step 3 .