Installation & Assembly

Step 3
Lift bench legs upright in degrees until the braces are locked, as shown in the diagram.
Attach the Leg Connector (B) to the Bench (A).
You may need to apply a little pressure to the Legs - pushing outwards to position, the Leg Connector
(B).
Using the Short Bolts ② with Spring Washer ④ & Flat Washers ⑤, tighten the bolts by using the Allen
Key ⑥, as shown in the diagram.
WARNING!! DO NOT OVER TIGHTEN.
OVER TIGHTENING COULD LEAD TO DAMAGE OF THE PRODUCT.
Step 2
Page 4 OF 6