Installation & Assembly

Step 5
Now, in a sequential manner, drive in and fully tighten all bolts.
Thereafter, turn the bench right way up.
The Bench now is ready to be used.
Loosely affix by using Long Bolts (C) with Small Flat Washers (F), as shown in the picture (1) and Short
Bolts (D) &Flat Washers (F) with Sleeve Nuts (E), as shown in the picture(2). Tighten with using the Allen
Key (G).
NOW, go back to all bolts previously loosely fasten, drive in and tighten all bolts in sequential manner.
This sequential manner will reduce possible distortion of frame.
CAUTION !! DO NOT OVER TIGHTEN.
OVER TIGHTENING COULD LEAD TO DAMAGE OF THE PRODUCT.
SLOWLY TIGHTEN ONLY UNTIL SECURE AND STABLE.
Step 4
5 OF 6