Installation & Assembly
Step 2
Step 3
Fix the Inner Table Leg with Pre-attached Leveller(C) and Outer
Table Leg with Pre-attached Leveller(D) with bolts(④), washers(②),
spring washers(③) and nuts(⑤) by spanner(⑥).
Do not over tighten.
Fix the bolts(①), washers(②), spring washers(③) to the unit by
spanner(⑥).
Do not over tighten.
Repeat the same assembly process for the other Inner Table Legwith
Pre-attached Leveller(C) and Outer Table Leg with Pre-
attachedLeveller(D).
DO NOT fully tighten at this stage.
C
D
⑥
② ③ ⑤
②
④
② ③ ①
②③①
C
D
⑥
② ③ ⑤
②
④
② ③ ①
②③①
Page 4 OF 7