Installation & Assembly

2
1A
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align the key slots on the fixture base to the mounting plate screws, place the fixture base onto the mounting plate,
and secure it by rotating it to the narrow portion of the keyed slot.
Screw the short end of the threaded nipple to the bottom of the fixture base.
Screw the lamps into the sockets.
Place the shade into the frame, then place them over the threaded nipple and secure them in place using the hex nut.
Install the decorative cup to the bottom of the shade and secure it using the finial.
1
2
3
4
5
6
7
LAMP
SHADE
SOCKET
Install the Fixture
Use 120 voltMAX 60 Watt
Type A19 Medium Base Lamp.
FIXTURE BASE
8
HEX NUT
DECORATIVE CUP
THREADED NIPPLE
8
9
6
ELECTRICAL BOX
MOUNTING
PLATE SCREW
MOUNTING PLATE
2
FINIAL
9
FRAME
1
5
7