PRODUCT NAME: 5LT Pendant Please consult your electrician for Hang fixture and wiring SNy Bulb(Not 60W MADE IN CHINA Page 1of (3)
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation §e08d (A)Bracket (B) Body (C)Ball nut (D)Wall anchor Locate all hardware & components before discarding packaging 1) AT -+ Step. 1:Remove mounting bracket(A) from fixture and install to electrical box. (green wire) 2.) A Step. 2: Wire fixture to wires in outlet box. Copper/Green wire is for Ground. .) YTy Step. 3: Install fixture to bracket and tighten ball nuts (C) on the canopy to secure.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation holder cap (F)Tapping screw (G)Screw (i) Wrench (I)Bulb Locate all hardware & components before discarding packaging Step. 4: Install Wall plug(D) into the ceiling, And use the tapping screw(F) to lock the wire holder cap Then install wire holder (E-2) into cap, and use wrench(F) to tighten screw(G) to lock wire holder in the cap. il . L Step. 5: Install the bulb(I).
