Assembly And Installation Instructions

Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Spare Parts List:
A: 4-3/4”
B: 21-1/2”
C: 6”
4. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire connectors:
---Connect the black wire from the fixture to the black wire from the power source.
---Connect the white wire from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then connect it to the house
grounding wire with a wire connector.
Carefully put the wires back into the outlet box.
5. Attach the fixture to the mounting plate by inserting the headless screw, then secure it with two rubber pads and two ball
nuts.
6. Attach the glass shade to the glass bracket by threading set screws onto the glass notches.
Green Grounding
Screw (E)
Headless screw (D)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (F)
Mounting plate (A)
Ball Nut (G)
Rubber Pad (H)
Set Screw (I)
A: 5”
B: 26”
C: 7”
Mounting Hardware
(1 SET)
Glass Shade
Glass Shade
Mounting Hardware
(1 SET)
Mounting Hardware
(1 SET)
Mounting Hardware
(1 SET)