Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Fixture Wire

Back Plate

Nipple (D)

Mounting Strap (A)

Hex Nut (F)

Wire Nut (C)

Washer (G)

Fixture Grounding Wire

Green Grounding Screw (E)

Outlet Box

House Grounding Wire

End Cap (I)

Rubber Pad (H)

Bulb Type A MAX 60W

(not included)

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Green Grounding

Screw (E)

Nipple (D)

Mounting Screw (B)

Wire Nut (C)

Hex Nut (F)

Washer (G)

Mounting Strap (A)

Rubber Pad (H)

End Cap (I)

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS ELECTRICAL SHOCK, SURE TOCIRCUIT SHUT OFF WARNING: BE SURETO TOAVOID SHUTRISK OFFOF POWER AT THE MAINBE FUSE OR POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Attach the nipple to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by using two mounting screws. 3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire nuts: ---The black wire from the fixture to the black wire from the power source. ---The white wire from the fixture to the white wire from the power source.