Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Mounting Screw (B)

Fixture Wire

Back Plate

Nipple (D)

Mounting Strap (A)

Hex Nut (F)

Wire Nut (C)

Washer (G)

Fixture Grounding Wire

Green Grounding Screw (E)

Outlet Box

House Grounding Wire

End Cap (I)

Rubber Pad (H)

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Green Grounding

Screw (E)

Nipple (D)

Mounting Screw (B)

Wire Nut (C)

Hex Nut (F)

Washer (G)

Mounting Strap (A)

Rubber Pad (H)

End Cap (I)

Hardware Package (inculded):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

Bulb Type T10 MAX 60W

(not included)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO TO SHUT SHUT OFF OFF TOAVOID AVOID RISK RISK OF OF ELECTRICAL ELECTRICAL SHOCK, BE SURE TO POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
1. Attach the nipple to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by using two mounting screws. 3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire nuts: ---The black wire from the fixture to the black wire from the power source. ---The white wire from the fixture to the white wire from the power source.