Installation & Assembly

ManualsBrandsGracie Oaks ManualsBenchesClogh Wood Bench

Table Of Contents

ASSEMBLY INSTRUCTIONS





"Hardware is attached underneath the seat bottom"

This product will take 15-20

minutes to assemble

Components List



























































Hardware List :





























 







 









Screw driver is require r assembly (not included)



  

 



 









1 OF4

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS Thank you for purchasing this quality product . Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment .
PAGE 2
ASSEMBLY INSTRUCTIONS Adjustable Leveler .-------------------. Grab hardware bag from underneath the Bench seat. Do not fully tighten bolts until the Product is level and the assembly of the product is completed. 1 Step 1: Lay the Bench Seat (A) upside down on a flat soft surface.Insert Bench using the provided hardware as shown on Center Leg (B) into Bench Seat (A), Using Fig. 1. At the same time insert Side Stretcher (E) into bench Center Legs (B). Do Not Fully Tighten Bolts Yet . Fig.2 2.
PAGE 3
ASSEMBLY INSTRUCTIONS Fig.3 3.5 Step 3: shown on Fig.3 3.1-Insert Front Stretcher (F) into Bench Center Leg (B). 3.2-Insert Side Stretcher (E) into Bench Leg (C). 3.3-Insert Front Stretcher (F), Side Stretcher (E) into Bench Leg (D). 3.4- Insert Bench Leg (D) into Bench Seat (A). 3.5- Attach Bench Leg (D) to Bench Seat (A). Using the provided hardware as shown in Fig. 3. Do Not Fully Tighten Bolts Yet Fig.4 Step 4.
PAGE 4
ASSEMBLY INSTRUCTIONS Fig.5 Step 5 : Insert Wood Screw (5) to fasten All stretchers (E, F) as shown on Fig. 5. Fig.6 Step 6: Place the loosely assembled Bench on a hard flat surface and apply gentle downward pressure on the seat. As shown on Fig.6. Once the Bench is balanced and leveled, fully tighten all bolts.