Installation & Assembly

A. Chair/Seat
C. Left Leg Frame
B. Right Leg Frame
Place the Chair/Seat(A) on a clean, non-marring surface.
take out all of the Parts and Hardware.
Step 2
Insert Barrel Nut(F) into the holes on Middle Support Rail(D),and use Screwdriver(L) to adjust the
Barrel Nut(F) mounting position.
Attach the Left Leg Frame(B) to Middle Support Rail(D) by inserting JCBC Bolt(E) into Barrel
Nut(F) with Allen Key(H) as showed in above.
Repeat the same process with the Right Leg Frame(C).
Only loosley tighten the Bolts.
Step 1
D. Middle Support Rail
Page 4 OF 7