Assembly Instructions Caution : You must read this before you proceed Dining Table Part List Label Picture Description QTY A Table Top 1 B Table Leg 4 Page 1 of 6
C Leg Support 2 Description QTY ① Bolt (M8 x 40mm) 20 ② Allen Key (M5) 1 ③ Wooden Dowel (M10x40mm) 8 Hardware Label Picture Before Beginning Assembly: Page 2 of 6
Assembly Steps Overview Table Top(A) Leg Support(C) Table Leg(B) This Dining Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place the Table Top(A), Table Legs(B) and Table Supports(C) on a clean, non-marring surface.
Step 2 Place the Leg Support(C) onto the Table Legs(B) as pictured. Attach Table Leg(B) to Leg Support(C) Bolts(①) with Allen Key(②). Do not fully tighten the Bolts. Repeat this same process with the other Leg Support and Table Legs. Note: The Dining Table and its parts are Heavy, two adults are required whenever moving or lifting them. Step 3 3.2 3.
3.1: Place the Table Top(A) facedown on a clean, non-marring surface to avoid any scratches or damage to the product and place the Table Legs(B) and Table Supports(C) facedown onto the Table Top(B) as shown. 3.2: Attach Table Supports(C) to Table Top(B) using Bolts(①) with Allen Key(②). Now Tighten all Bolts at all joints in a sequential manner. Note: The Dining Table and its parts are Heavy, two adults are required whenever moving or lifting them. Step 4 Your Dining Table is now ready for use.
Care & Maintenance Page 6 of 6
