Assembly Instructions

Step 2
Step 3
Align the Seat(C) with Left Armrest(A), Right Armrest(B), and Backrest(D).
Attach Seat(C) to Left Armrest(A), Right Armrest (B) and Backrest(D) using Bolts(①)
and Washers(②) with Allen Key(③) as pictured.
Tighten all Bolts at all joints sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.This may cause
the frame to warp.
Attach the Backrest(D) to the Left Armrest(A) and Right Armrest(B) using Bolts(①) and
Washers(②) with Allen Key(③) as shown in the picture.
Do not fully tighten the Bolts.
Page 4 OF 6