Installation Instructions

1
Installation Instructions for
Install the fixture arms by hooking them to the loops on the hub and fixture.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the silicon pad on the socket base.
Screw the shade into the socket base.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
1
2
1A
1.0
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
Chandelier
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
HUB
LOOP
LOOP
FIXTURE ARM
4
5
1
1
5
SHADE
4
SILICONE PAD
SHADE BASE
3
2
LAMP
Outdoor Chandelier