Operation Manual

60
GRACE ONE 2013 Manual
The cockpit
The stem of your GRACE ONE E-Motorbike forms the connection between the handlebars
and the steerer tube. The cockpit, the front lights and the on-board computer are all
integrated into the stem.
The operating elements for the on
-
board
computer are located on the left hand side at the
stem.
The headlamp on the top is the low beam light
and the lower headlamp is the high beam.
Low beam light
High beam light
Activate the button with the light symbol on the
right side of the stem.
The low beam and the rear light will come on.
In order for the low beam light to come on, the low beam must be switched off. Activate
the high beam switch on the right side of the handlebars.
If the high beam is turned on, the high beam switch will be lit up in blue for checking
purposes. The low beam will then be switched off.
Pressing on the high beam switch again will turn the low beam on once more and turn the
high beam off. If you use the high beam as a flasher, the low beam must not be switched
on.