Operation Manual

56
GRACE ONE 2013 Manual
Setting the seat height
1.
2.
To set the seat height, loosen the two Allen
screws of the seat post clamp.
Adjust the seat height so that the upper edge
of the seat is approximately at the level of
your
hip bone, when you are standing next to
your GRACE ONE.
Within the adjustment range of the seat post, there are technical
components such as cables and batteries.
Therefore, proceed cautiously
when you are pushing in and pulling out the seat post!
Pull the seat post no further than 30 cm out of the seat tube at the most.
3.
Make sure that the seat is aligned parallel to
the top tube of your GRACE
ONE.
4.
Tighten the screws of the seat post clamp
evenly in turn several times in sequence until
both screws are equally tight.
As you are doing so, check that the clamp is
in its proper position.
max.
30 cm