Operation Manual

GRACE ONE 2013 Manual
55
Checking the tyre pressure
Tyres make contact between the wheels and the road. They ensure that the wheels grip
the road and that there is traction and absorb small shocks depending on the tyre
pressure.
Please note the manufacturer’s information on air pressure printed on the
side of the tyre.
Exceeding the maximum permissible air pressure when you pump your tyres
can lead to their bursting.
The GRACE ONE E-Motorbike is equipped with the following standard tyres:
SCHWALBE Crazy Bob special street legal edition (26 x 2.35)
The manufacturer recommends the following readings for operating pressure for the tyres
used:
2.0 – 2.5 bar (30 – 35 psi) for the front wheel tyres
2.0 – 2.5 bar (30 – 35 psi) for the rear wheel tyres
Please note when you are replacing tyres that you must use tyres of the same
type, dimensions and tread exclusively.
The ECE mark must be printed on the tyres!
The tyres are filled with air and the air pressure is
regulated by means of
Schrader valves.
This
can be done with track pumps or with
the
compressed air dispenser at the petrol station.