Operation Manual

Mounting the tensioned belt with a lever, and/or by rotating the cranks.

Please note:

Drive belt and sprockets do not need lubrication of any sort. For cleaning, use only water

and a soft brush. Please do not use any type of detergent.

Uncoiling the belt

To uncoil the belt, follow the instructions below. Improper uncoiling may cause permanent

damage to the belt. It will never be necessary to violently pull the belt. Make sure that the

belt is never bent to smaller diameters, as this might damage the carbon bers inside the

belt.

Hold the belt chest high in

front of your body.

Hold the outer coils with

both hands.

Move your hands away

from each other slowly,

until the belt uncoils on its

own.

Now the belt is properly

uncoiled.

rst steps