Operation Manual

Page | 118
GRACE MX II Operating instructions
5.12. Tyre change
Remove the valve cap on the tube and, where
present, the knurled nuts on the valve connection.
Remove the air from the tube by pressing the
valve pin. Using a tyre lever, remove the tyre from
the rim. Replace faulty tyres or tubes.
Always replace the tube when replacing an existing tyre with a new tyre!
Pull the tyre with one side onto the rim. Pay
attention to the tyre direction stamped onto the
tyre by the manufacturer.
Push the valve through the hole and place the
tube into the rim well.