Operation Manual

GRACE MX II Operating instructions
Page | 109
4.7. Lights
A precise lens system scatters light of a high-
performance LED evenly on the road surface. This
produces a high light intensity thus increasing
safety.
Pressing the lighting button on the on-board
computer switches on the LED headlight and the
rear light.
The headlamp range must be adjusted according
to local national regulations. The adjacent figure
shows the requirements as applicable for
Germany for example. The headlight must be
adjusted so that the light cone hits the ground
after 10 m, or at distance of 5 m (1
6.4 ft) is only
half as high as when it was emitted.
Park the bike on an even surface. Undo the
screw underneath the he
adlight with an Allen
key SW 3
and tilt it accordingly.
5 m
10
m
a
/
2
a