User's Manual

Smart Bulb
Smart Bulb WiFi+bluetooth
Smart Bulb WiFi+bluetooth
If you got two or more light, please tap "..." at the upper
right cornor of the control panel and create group. The
smart lamp group will realize synchronous switch, color
changes, the scene mode selection, timer, etc.
Grouping
- 09 -
After the device is connected successfully. The device
name of the smart lamp shows in the list. Tap it to enter
the control panel of the Smart Bulb.
Adjust brightness and color temperature of white light.
White Mode
Smart Bulb WiFi+bluetooth
Adjust color, brightness, saturation of colorful light.
Color Mode
Smart Bulb WiFi+bluetooth
CONTROL DEVICE
Adjust brightness and color temperature of white light.
Scene Mode
- 05 - - 06 - - 07 -
1: Search “Tuya Smart” from App store or Google play.
2: Scan the QR code from the label or user manual.
The APP is compatible with Android 4.4 and IOS9.0
and higher version.
Open the Tuya Smart APP, sign up for a new account
or log in with an existing account.
Android 4.4 iOS 9.0
COLOR
INPUT VOLTAGE
Current(mA) Base Power(W)
C/W
CCT
RGBW
RGB+CCT
AC120V
60Hz
GU1065 5
FEATURES DOWNLOAD APP
LOG IN / REGISTER ACCOUNT NUMBER
PARAMETERS
WIRING DIAGRAM
Voice control
Timer & Schedule
No Hub required
Remote control
Grouping
Wi-Fi & Bluetooth
connection
Sync Music
Dimmable
1. Turn on the Smart Bulb and enter the home of APP
while ensure Bluetooth on and the WIFI signal is
good and stable.
2. Smart Bulb will flashing when turn on the power
supply. Stay at the home page and found the push
notification, then click ”Go to add”.
3. Select the Wi-Fi connected to the smart device,
input the Wi-Fi password, and then click “Next” to
wait for the matching to succeed.
(Make sure smart devices share the same Wi-Fi.)
(Note: If the lamp is not blinking rapidly, please turn
off the lamp, and then switch it following the steps:
ON-OFF-ON-OFF-ON until it’s blinking rapidly.)
Smart Bulb
Push Notification
Stay at the Home Page
Smart Bulb GU10
This will switch OFF the Smart Bulb in a specific duration
of time.
Timer
DEVICE PAIRING-EASY IN
- 01- - 02 - - 03 -
This will keep the Smart Bulb in ON/OFF position for a
specific duration of time.
Schedule
- 08 -
4. The interface of connecting will appear, when the
device is found, the lamp will stop blinking and then
initializing device will be complete.
The Smart Bulb is added once they are communicating
on the same Wi-Fi Network. You can rename the smart
device by clicking on the pencil icon.
Press the “Done” button at the bottom of screen to
continue to next step.
Add Device
Enter/Confirm Wi-Fi Password
Smart Bulb WiFi+bluetooth
Smart Bulb WiFi+bluetooth
Smart Bulb
Smart Bulb WiFi+bluetooth
Connecting
Confirmation Interface
- 04 -
Smart Bulb WiFi+bluetooth
Smart Bulb WiFi+bluetooth
50mm
56mm