User`s guide
Customer Support: 1-888-999-4215 9
Important Note
What does it mean to pair?
Additional Information
Pairing the Wireless Speakers
While the wireless speakers were paired
at the factory to allow for immediate
operation, they will occasionally become
un-paired in transit. Un-pairing can also
occur in day-to-day operation due to
dierent environmental inuences. This is
normal. Should this occur, please follow the
pairing instructions below.
Pairing allows the base station to recognize
a wireless speaker. Once a wireless speaker
is paired, the base unit will transmit audio
to it.
• Once paired, the wireless speaker can
be moved up to 200ft (line-of-site)
or up to 90ft (indoors) depending on
environmental conditions. Should the
sound drop or become garbled it will
be necessary to move the speaker to
another location in order to receive the
signal clearly.
• Up to 8 wireless speakers can be paired
with one base station. Additional
speakers sold separately.
Keep the base station and all wireless
speakers within 4 feet of each other
when you pair them.
1. Plug the base station into a power
source and press the POWER button
to power the base station on.
The base station Link Indicator will ash
when the base station is powered on.
2. Plug the wireless speaker into a power
source or insert 4 D batteries (not
included) and press and hold the
POWER button to power the wireless
speaker on.
The wireless speaker Link Indicator
will ash when the wireless speaker is
powered on.
3. Press the PAIR button on the base
station and the PAIR button on the
wireless speaker.
After pairing, the speaker may take up to
5 minutes to begin playing audio from
the base station.
4. Repeat steps 1-3 for each additional
wireless speaker.
Wireless Speakers Setup
Link Indicator System Status
OFF Powered o
SLOW FLASHES Standby mode
QUICK FLASHES Attempting to pair
SOLID LIGHT Paired and playing