Product Manual A
7922107-01D PRO20-115 / PRO20-115RD / PRO20-230
SPECIFICATIONS
The PRO20-115 and PRO20-230 fuel pumps are de-
signed to safely transfer low viscosity petroleum fuels
such as gasoline (up to 15% alcohol blends such as E15),
diesel fuel (up to 20% biodiesel blends such as B20)
and kerosene. The pumps are designed for permanent
mounting on vented storage tanks, either in-ground or
above-ground. RAINPROOF for outdoor use. Use of
alcohol blends above 10% (E10) and biodiesel blends
above 5% (B5) have not been reviewed by UL.
Performance
Pump Rate: PRO20-115: Up to 20 GPM (76 LPM)
PRO20-230: Up to 20 GPM (76 LPM) @ 60 Hz
Up to 17 GPM (64 LPM) @ 50 Hz
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature
-20° F to +125° F (-29° C to +52° C)
XTS Operating Temperature
Extreme Temperature Series pumps are capable
of operation down to -40° F. Any pump operation
below -20° F has not been evaluated by UL.
Bypass Pressure
22 PSI
Electrical
Input: PRO20-115: 115 VAC, 60 Hz
PRO20-230: 220-240 VAC, 50-60 Hz
Conduit: ½ inch FNPT
Current Draw: PRO20-115: 4.9 amps at full load
PRO20-230: 2.3 amps on 60 Hz
2.5 amps on 50 Hz
at full load on 230 VAC
Motor: PRO20-115:
1
/
3
HP, 1725 RPM
PRO20-230:
1
/
3
HP, 1725 RPM on 60 Hz
or .19 kw, 1425 RPM on 50 Hz
Both motors are induction type with an internal
temperature-limiting device.
Mechanical Connections
Bung: 2 inch NPT
Inlet: 1 inch NPT
Outlet: 1 inch NPT
Accessories
Hose: 1 in. NPT x 1 in. x 18 ft. (5.5 m)
Buna-N electrically conductive
Nozzle: 1 in. NPT manual diesel or 1 in. NPT automatic
diesel
Security: Nozzle can be padlocked
Ship Weight PRO20-115PO 48.6 lbs (22.0 kg)
PRO20-115MD 59.5 lbs (27.0 kg)
PRO20-115AD 61.6 lbs (27.9 kg)
PRO20-115RD 46.9 lbs (21.3 kg)
SAVE THESE INSTRUCTIONS
PARTS AND SERVICE
In order to preserve the UL Listing for pump safety, return
the entire pump to the factory for repair or replacement.
For products serviced outside the factory, the UL name-
plates must be defaced to indicate that the equipment
may no longer meet the requirements for UL Listing.
This does not apply to products serviced outside the
factory under the UL program for Rebuilt Motors for Use
in Hazardous Locations.
For warranty consideration, parts, or other service infor-
mation, please contact your local distributor. If you need
further assistance, contact the Great Plains Industries
Customer Service Department in Wichita, Kansas, during
normal business hours.
800-835-0113 or 316-686-7361
To obtain prompt, efcient service, always be prepared
with the following information:
1. The model number of your pump.
2. The manufacturing date code of your pump.
For the PRO20-115 and PRO20-230 series, the date
code is located on the motor nameplate.
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact Great Plains Industries before returning
any pump. It may be possible to diagnose the trouble
and nd a solution with a telephone call. Great Plains
Industries can also inform you of any special requirements
you will need to follow for shipping.
Do not return the pump without authority from the Customer
Service Department. Due to strict government regulations, Great
Plains Industries cannot accept pumps unless they have been
drained and cleaned.
CAUTION