Product Manual A

ManualsBrandsGPRO ManualsAC Powered Fuel PumpsGPI 115-VAC Commercial Grade Fuel Transfer Pump With Meter — 20 GPM

TABLE OF CONTENTS

General Information ..............................................................2

Installation ............................................................................2

Operation ..............................................................................4

Maintenance ......................................................................... 4

Troubleshooting .................................................................... 5

Illustrated Parts Drawing ......................................................6

Specications .......................................................................7

Parts and Service .................................................................7

Warranty .......................................................See Insert

To the owner...

Congratulations on receiving your GPRO™ Fuel Transfer

Pump. We are pleased to provide you with a system designed

to give you maximum reliability and efciency.

Your fuel pump is designed, tested, and approved for use with

gasoline, kerosene, and diesel fuel. Please take all due pre-

cautions when handling these ammable liquids. Your safety

is important to us.

Also, to assure the longest possible service life, it is important

that you follow the operation and maintenance procedures

outlined in this manual. We are proud to provide you with a

quality product and dedicated support. Together with your

conscientious use, we are sure that you will obtain years of

safe, dependable service

Victor Lukic, President

Great Plains Industries, Inc.

SAVE THESE INSTRUCTIONS

DO NOT RETURN THIS PRODUCT TO THE STORE!

Please contact Great Plains Industries before returning any product. If

you are missing parts or experience problems with your installation, our

Customer

Support Department will be happy

to assist you:

800-835-0113 or 316-686-7361

OWNER'S MANUAL

PRO20-115

PRO20-115RD

115-Volt AC

PRO20-115AD Automatic Diesel Nozzle

PRO20-115MD Manual Diesel Nozzle

PRO20-115PO Pump Only

PRO20-115RD For Remote Dispensing

Systems

PRO20-115PO/XTS Pump Only - Extreme

Temperature Series

PRO20-230

230-Volt AC

PRO20-230AD Automatic Diesel Nozzle

PRO20-230MD Manual Diesel Nozzle

PRO20-230PO Pump Only

11/14

922107-01D

Summary of content (8 pages)

PAGE 1
OWNER'S MANUAL SAVE THESE INSTRUCTIONS PRO20-115 PRO20-115RD PRO20-230 115-Volt AC PRO20-115AD PRO20-115MD PRO20-115PO PRO20-115RD Automatic Diesel Nozzle Manual Diesel Nozzle Pump Only For Remote Dispensing Systems PRO20-115PO/XTS Pump Only - Extreme Temperature Series 230-Volt AC PRO20-230AD Automatic Diesel Nozzle PRO20-230MD Manual Diesel Nozzle PRO20-230PO Pump Only DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact Great Plains Industries before returning any product.
PAGE 2
GENERAL INFORMATION cern and requires extreme care in the installation and operation of your entire fuel transfer system. Your pump is designed for use only with thin viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. Do not use this pump for dispensing any fluids other than those for which it was designed. Using the pump with other fuels can damage components and void the warranty.
PAGE 3
To reinstall the nozzle hanger follow the steps below. 1. Remove the two (2) 1/4"-20 x 1/2" bolts from the switch coverplate. 2. Place the nozzle cover on the switch coverplate and align holes. 3. Insert the two (2) 1/4"-20 x 1/2" bolts through the nozzle cover and thread into the switch coverplate. Torque bolts to 45-60 in/lb (Figure 1). FIGURE 1 control circuit is 1 amp. If you do not need this feature, ensure that the wire is insulated and enclosed within the electrical cavity of the pump.
PAGE 4
MODEL PRO20-115 - WIRING DIAGRAM 115-VOLT AC SINGLE PHASE – 60 HZ is closed. Do not leave the pump on for more than 10 minutes with the nozzle closed. Never leave the pump running without fluid. Dry running can damage the pump components. BROWN (Accessory Lead) Note: Insulate if not used. The pump has a duty cycle of 30 minutes ON and 30 minutes OFF. Do not overheat. Allow the motor to cool the same length of time it was in operation.
PAGE 5
TROUBLESHOOTING SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION A. MOTOR DOES NOT RUN 1. No electrical power to pump Check breaker, switchbox and wiring. 2. Temperature-limiting device tripped Allow motor to cool. Temperature-limiting device will automatically reset. 3. Rotor or vanes jammed B. MOTOR RUNS, BUT NO 1. Tank level low FLOW 2. Clogged filter assembly C. PUMP FAILS TO PRIME D. LOW FLOWRATE F. FUEL LEAKAGE G. MOTOR OVERHEATS Add fuel to tank. Remove and clean filter assembly. 3.
PAGE 6
ILLUSTRATED PARTS DRAWING 41 34 39 PRO20-115RD ONLY 34 17 36 35 28 29 31 33 27 45 8 32 43 46 26 30 25 9 12 24 1 20 15 40 14 11 19 21 5 4 37 10 22 C 3 18 16 23 38 44 GPRO™ Item No. Part No.
PAGE 7
SPECIFICATIONS PARTS AND SERVICE The PRO20-115 and PRO20-230 fuel pumps are designed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. The pumps are designed for permanent mounting on vented storage tanks, either in-ground or above-ground. RAINPROOF for outdoor use. Use of alcohol blends above 10% (E10) and biodiesel blends above 5% (B5) have not been reviewed by UL.