Product Manual
7922108-01D PRO35-115 / PRO35-115RD
SPECIFICATIONS
The PRO35 series fuel pump is designed to safely trans-
fer low viscosity petroleum fuels such as gasoline (up to
15% alcohol blends such as E15), diesel fuel (up to 20%
biodiesel blends such as B20) and kerosene. The pump
is designed for permanent mounting on vented storage
tanks, either in-ground or above-ground. RAINPROOF
for outdoor use. Use of alcohol blends above 10% (E10)
and biodiesel blends above 5% (B5) have not been
reviewed by UL.
Performance
Pump Rate: Up to 35 GPM (132 LPM)
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature
-20° F to +125° F (-29° C to +52° C)
XTS Operating Temperature
Extreme Temperature Series pumps are capable
of operation down to -40
°
F. Any pump operation
below -20
°
F has not been evaluated by UL.
Bypass Pressure
25 PSI
Electrical
Input: Factory set at 115 VAC, 60 Hz. Optional
to set at 230 VAC, 60 Hz.
Conduit: ½ in. FNPT
Current Draw: 9.8 amps at full load (at 115 VAC, 60
Hz)
Motor: ¾ HP, 1725 RPM induction type
provided with an internal auxiliary
temperature-limiting device
Mechanical Connections
Bung: 2 in. MNPT
Inlet: 1 ¼ in. FNPT
Outlet: 1 in. FNPT
Accessories
Hose: 1 in. NPT x 1 in. x 18 ft. (5.5m) Buna-N
electrically conductive
Nozzle: 1 in. NPT manual or 1 in. NPT auto-
matic diesel
Security: Nozzle can be padlocked
Ship Weight PRO35-115PO 67.0 lbs (30.4 kg)
PRO35-115MD 78.0 lbs (35.4 kg)
PRO35-115AD 80.2 lbs (36.4 kg)
PRO35-115RD 65.1 lbs (29.5 kg)
SAVE THESE INSTRUCTIONS
PARTS AND SERVICE
In order to preserve the UL Listing for pump safety, return
the entire pump to the factory for repair or replacement.
For products serviced outside the factory, the UL name-
plates must be defaced to indicate that the equipment
may no longer meet the requirements for UL Listing.
This does not apply to products serviced outside the
factory under the UL program for Rebuilt Motors for Use
in Hazardous Locations.
For warranty consideration, parts, or other service infor-
mation, please contact your local distributor. If you need
further assistance, contact the Great Plains Industries
Customer Service Department in Wichita, Kansas, during
normal business hours.
800-835-0113 or 316-686-7361
To obtain prompt, efcient service, always be prepared
with the following information:
1. The model number of your pump.
2. The manufacturing date code of your pump.
For the PRO35 series, the date code is located on the
motor nameplate.
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact Great Plains Industries before returning
any pump. It may be possible to diagnose the trouble
and nd a solution with a telephone call. Great Plains
Industries can also inform you of any special requirements
you will need to follow for shipping.
Do not return the pump without authority from the Customer
Service Department. Due to strict government regulations, Great
Plains Industries cannot accept pumps unless they have been
drained and cleaned.
CAUTION
POWER OPERATED
PUMP FOR PETROLEUM
PRODUCTS
MOTOR FOR
HAZARDOUS LOCATIONS
Certied
Motor