Product Manual
6 922105-01B PRO20-012
SPECIFICATIONS
APPLICATION: Designed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol
blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. Pump
is designed for permanent mounting on vented storage tanks.
PUMP HOUSING: Cast Iron
PERFORMANCE: Pump Rate: Up to 20 GPM (76 LPM)
Duty Cycle: 30 min. ON, 30 min. OFF
Suction Lift: Up to 15 feet (4.6 meters)
OPERATING TEMPERATURE: -20°F to +125°F (-29°C to +52°C)
EXTREME TEMPERATURE SERIES
OPERATING TEMPERATURE
Extreme Temperature Series (XTS) pumps are capable of operation down to -40°F. Any pump
operation below -20°F has not been evaluated by UL.
BYPASS PRESSURE 20 PSI
ELECTRICAL SPECIFICATIONS:
Input: 12-volt DC
Current Draw: 27 A
Motor: 2350 RPM, 3/10 hp (220 watts)
Motor Approval:
Class 1, Division 1, Group D
Motor Protection: 40 amp circuit breaker
Cord: 18 ft., 12 gauge
Fuse: 40 amp
MECHANICAL CONNECTION:
Bung 2 inch NPT
Inlet: 1 inch NPT
Outlet: 1 inch NPT
ACCESSORIES:
Hose Type: Buna-N Electrically Conductive Discharge Hose
Hose Size: 1 in. NPT x 1 in. x 18 ft. (5.5 m)
Manual Nozzle: 1 in. NPT Diesel
Automatic Nozzle: 1 in. NPT Diesel
WEIGHT: PRO20-012AD
49.6 lbs. (22.5 kg)
PRO20-012MD
47.5 lbs. (21.5 kg)
PRO20-012PO
35.5 lbs. (16.1 kg)
PARTS AND SERVICE
SAVE THESE INSTRUCTIONS
In order to preserve the UL Listing for the motor, do not
attempt to service the motor. For products serviced outside
the factory, the UL nameplate must be defaced to indicate
that the equipment may no longer meet the requirements
for UL Listing. This does not apply to products serviced
outside the factory under the UL program for Rebuilt
Motors for Use in Hazardous Locations.
For warranty consideration, parts, or other service infor-
mation, please contact your local distributor. If you need
further assistance, contact the Great Plains Industries
Customer Service Department in Wichita, Kansas, during
normal business hours. A toll-free number is provided for
your convenience.
800-835-0113 or 316-686-7361
To obtain prompt, efcient service, always be prepared
with the following information:
1. The model number of your pump.
2. The serial number or manufacturing date code of your
pump. For the PRO20-012 series pumps, the date
code is located on the motor nameplate.
3. Part descriptions and numbers.
Part information can be obtained from the Illustrated
Parts Drawing.
For warranty work, always be prepared with your original
sales slip or other evidence of purchase date.
Please contact Great Plains Industries before returning
any parts. It may be possible to diagnose the trouble and
identify needed parts in a telephone call. Great Plains
Industries can also inform you of any special require-
ments you will need to follow for shipping fuel dispensing
equipment.
Do not return the pump or parts without authority from the Cus-
tomer Service Department. Due to strict government regulations,
Great Plains Industries cannot accept parts unless they have been
drained and cleaned.
CAUTION