Product Manual

7
Application Designed to safely transfer low viscosity petroleum fuels such as gasoline (up to 15% alcohol
blends such as E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene.
Pump is designed for permanent mounting on vented storage tanks.
Pump Housing Cast Iron
Performance:
Pump Rate Up to 25 GPM (94 LPM) Up to 25 GPM (94 LPM)
Duty Cycle 30 min. ON, 30 min. OFF 30 min. ON, 30 min. OFF
Suction Lift: Up to 15 feet (4.6 meters) Up to 15 feet (4.6 meters)
Discharge Lift: Up to 10 feet (3 meters) Up to 10 feet (3 meters)
Operating Temperature -20°F to +125°F (-29°C to +52°C)
Electrical Specifications:
Input 12-volt DC 24-volt DC
Current Draw 35 amps 20 amps
Motor 2000 RPM, 4/10 hp (300 watts) 2000 RPM, 4/10 hp (300 watts)
Motor Approval cULus Listed. Class I, Division 1, Group D cULus Listed. Class I, Division 1, Group D
Motor Protection 40 amp circuit breaker 20 amp circuit breaker
Cord 15 feet of 10 gauge (4.6 meters) 15 feet of 10 gauge (4.6 meters)
Fuse 40 amp 20 amp
Mechanical Connection:
Bung 2 inch NPT 2 inch NPT
Inlet 1 inch NPT 1 inch NPT
Outlet 1 inch NPT 1 inch NPT
Accessories:
Hose Type Buna-N Electrically Buna-N Electrically
Conductive Discharge Hose Conductive Discharge Hose
Hose Size 1 NPT x 12 ft. (3.7 m) 1 NPT x 12 ft. (3.7 m)
Manual Nozzle 1 inch Leaded 1 inch Leaded
Automatic Nozzle 1 inch Diesel 1 inch Diesel
Weight:
M-3X25-PO 51 lbs. (23 kg) 51 lbs. (23 kg)
M-3X25-ML 57 lbs. (26 kg) 57 lbs. (26 kg)
M-3X25-AL 60 lbs. (27 kg) 60 lbs. (27 kg)
M-3X25CS-PO 57 lbs. (26 kg) 57 lbs. (26 kg)
M-3X25CS-ML 71 lbs. (32 kg) 71 lbs. (32 kg)
M-3X25CS-AL 71 lbs. (32 kg) 71 lbs. (32 kg)
M-3025
M-3425
SPECIFICATIONS