Product Manual
6
The HP-100 Dual-Flo
®
Petroleum Hand Pump is
compatible with a wide variety of petroleum products and
ts any container with a 2-inch NPT bung. Use with diesel
fuel (biodiesel blends B20), gasoline (alcohol blends
E15), hydraulic uid, kerosene and oil (up to 30 wt.).
This equipment should not be used to pump chemicals.
Construction: Lightweight, die-cast aluminum
housing. Stainless steel piston
shaft and liner. Buna-N seals.
Built-in air valve to prevent
leakage at the nozzle.
Pumping Capacity: 1/2 gallon (1.9 litres) per stroke
cycle.
Pumping Settings: 1/2-gallon setting for high
volume, high resistance.
1/4 gallon setting for low volume,
low resistance.
Inlet: Standard 1-inch NPT pipe.
Outlet: Standard 3/4-inch NPT pipe.
Shipping Weight: 14 lbs.
Hose and Nozzle: Non-UL Model:
3/4 inch x 8 foot Buna-N hose.
Thermoplastic unleaded nozzle.
Built-in nozzle holder.
UL Model:
3/4 inch x 8 foot Electrically
Conductive hose (UL Listed)
with metal nozzle.
Suction Pipe: Plastic, adjustable 22 to 40 inches.
For warranty consideration, parts or other service
information, please contact your local distributor or the
GPI Customer Service Department in Wichita, Kansas,
during normal business hours.
1-800-835-0113
To obtain prompt, efcient service, be prepared with the
following information:
• The model number of your pump.
• The manufacturing date of your pump.
• Part descriptions and numbers.
Part descriptions and numbers can be obtained from
the Illustrated Parts List.
For warranty service, be prepared with your original
sales slip or other evidence of purchase date.
SPECIFICATIONS PARTS AND SERVICE