Product Manual

2
1. This meter is designed for use with
Gasoline, Gasoline/Ethanol blends
at levels designated as "gasohol"
(E10 maximum), diesel and
kerosene.
2. Do not use this equipment for
dispensing any fluids other than
those for which it was designed.
Doing so may damage the meter
and will void the warranty.
3.
DANGER
Observe pre-
cautions against fire or explosion
when dispensing fuel. Do not
operate the meter in the presence
of any source of ignition including
running or hot engines, lighted
cigarettes, or gas or electric heaters.
4.
WARNING
Any components
such as hose, nozzle, or pump
added to your meter must be
statically grounded and approved for
use with petroleum fuels.
5.
WARNING
Avoid prolonged
skin contact with petroleum fuels.
Use protective goggles, gloves,
and aprons in case of accidental
splashing or spillage. Change
saturated clothing and wash skin
contact areas promptly with soap
and water.
6.
WARNING
Part of the
enclosure is constructed from
plastic. To prevent the risk of elec-
trostatic sparking the plastic surface
should be cleaned only with a damp
cloth.
7.
WARNING
The apparatus
enclosure contains aluminum
and is considered to constitute a
potential risk of ignition by impact
or friction. Care must be taken into
account during installation and use
to prevent impact or friction.
GENERAL INFORMATION
The purpose of this manual is to assist
you in installing, operating and main-
taining your digital fuel meter. Please
take a few moments to read these
instructions before installing and
operating your fuel meter.
SAFETY INSTRUCTIONS
The following safety
alert symbols are used
in this manual.
DANGER
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous
situation which, if not avoided,
could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous
situation which, if not avoided, may
result in minor or moderate injury.
It is your responsibility to:
• Know and follow applicable
national, state and local safety
codes pertaining to installing and
operating electrical equipment
forusewithammableliquids.
• Know and follow all safety
precautions when handling
petroleum fuels.
• Ensure that all equipment
operators have access to
adequate instructions con-
cerning safe operation and
maintenance.