User's Manual

SD Card Error: 3 beeps (300ms) every 3 seconds repeated 3 times, LED1continuously flashes alternating Red and
Green.
SD Card Full: Occurs when 2GB of disk space remains. 3 beeps (300ms) every 3 seconds repeated 3 times, LED1
continuously flashes Amber.
When the SD card is full, the recording will stop andLED1 will turn solid Amber.
Low Battery: When the battery is less than 3.55V. 3 beeps every 300ms repeated 3 times, LED2 continuously
flashes Red every 3 seconds repeated 5 times.
Full Battery: When charging is complete, LED2 turns solid Green.
Data Transmission: LED1 turns solid blue. No beeps. (did not apply yet)
Disk Format: LED1 turns solid Red.
GPS On: Blink LED1/second (50ms)
Command Transfer Setting: LED1 flashes once to 500ms speed (Green)
Setting Connection or Device Access: LED1 flashes Green every 500ms.
1 beep will occur if the unit is charging on the cradle and connected to the network.
If power is not supplied to the cradle, the green LED indicator on front of the cradle is off and turns solid Green
when the power is established.
**Factory Default: Simultaneously press and hold the Record and Mode button for 2~3 seconds.