User's Manual

7
English
By Wireless Connection
Before proceeding, please ensure you have the following:
• A Wi-Fi enabled Mac/ PC.
• KEF Wireless Easy Setup Wizard (available at www.kef.com).
• Name and password of your home Wi-Fi network.
1. Run the KEF Wireless Easy Setup Wizard and select your language of choice.
2. Click “First time setup” and follow the on-screen instructions to complete the setup process.
By Wired Connection
Before proceeding, please ensure you have the following:
• A Mac/ PC with Ethernet port.
• Name and password of your home Wi-Fi network.
1. Disconnect all network connections of your Mac/ PC.
2. Connect the Ethernet cable to the Ethernet port of your Mac/PC and LAN port
9
of X300A Wireless.
3. Power up each speaker
1
and turn on the system by pressing the standby button
3
.
Indicator light will ash blue.
4. Indicator light will turn to solid blue once the network connection is established.
This process may take up to 2 minutes.
5. Run the internet browser on your computer, enter the URL http://169.254.112.202
6. a) (Optional) Rename your speaker.
b) Select the home Wi-Fi network you are going to connect to and input the password.
Click “Save” and remove the LAN cable.
7. Speaker will restart. Blue light will ash and become solid again when the setup is completed.
Wireless Network Set-Up
A few more steps are needed before you can start wireless streaming.
You can setup a connection between X300A Wireless and your home Wi-Fi network by either wireless
connection or wired connection.
* X300A Wireless will remember the last home Wi-Fi network it was connected to. Every time the system
restarts, it will automatically search and connect to that network.