Dome Manual Dual Fuel

26
E ERROR CODE
If the thermometer is displaying an
error code E1. This is caused by either:
1) A loose connection where the jack
plug connects to the thermometer.
Please ensure the jack plug is pushed
fully in to the socket on the back of the
thermometer.
2) Loose connection at the terminal.
Please refer to maintenance instructions
at the end of the manual.
3) Damage to the probe. The probe may
need replacing. Please refer to main-
tenance instructions at the end of the
manual.
E1
°F
OVEN T
PROBE T ll
Digital Temperature Display Troubleshooting