Operation Manual

18
4. Connect the device to a properly installed and easily accessible mains socket.
5. You can choose from two different speed settings:
a) Hold down the On/Off switch for setting I for a low
speed.
b) Hold down the On/Off switch for setting II for a higher
speed.
The device keeps running if you are holding down one of
the On/Off switches. If you let go of the On/Off switch, the
device stops.
With the aid of the speed controller, you can also infi nitely
control the speed of the two speed settings.
6. Move the device in a circular motion inside the bowl until everything has been chopped
up or blended to your satisfaction.
7. Remove the mains plug from the socket after use.
Cleaning and Storage
CAUTION!
❐ Remove the plug from the mains socket before cleaning the device.
❐ The double blade is very sharp! Please take care when using the device!
❐ Clean the device after every use to prevent the formation of germs.
❐ Never touch the device, cable or plug with wet hands.
❐ To prevent electric shocks, make sure that the motor unit, the mains cable and the plug
cannot fall into water or other liquids and cannot come into contact with them.
❐ Allow the device to cool down completely before cleaning it.
❐ Do not use corrosive or abrasive cleaning agents and cleaning pads to clean the device.
These could damage the surface.
❐ The device is not dishwasher-safe!
Some foodstuffs such as carrots may cause staining of the measuring and mix-
ing cup. This is not harmful to health and does not impair the functionality of the
device.
1. To clean the blending attachment, separate it from the motor unit by turning the motor
unit in the direction of the opened lock symbol.
2. Wipe the motor unit with a slightly damp, soft cloth and then dry it with a soft cloth.
06844_DE-GB-FR-NL_V0.indb 1806844_DE-GB-FR-NL_V0.indb 18 21.11.11 09:1021.11.11 09:10