Operation Manual

Wafﬂ e plates

You can prepare delicious wafﬂ es with these plates.

1. Insert the wafﬂ e plates in the device as described in the chapter “Inserting and changing the

plates”.

2. Connect the device to a properly installed, easily accessible socket. The red power LED will

illuminate as soon as the device has been connected to a socket.

3. The device must pre-heat now. Always keep the device closed during this time. The pre-

heating process takes about 3–5 minutes and has ended when the green power LED

illuminates.

4. When the green power LED illuminates and the pre-heating process has ended, release the

latch and open the device.

5. Now add the wafﬂ e batter to the bottom wafﬂ e plate. Do not overdo it so that the batter is

not pressed out on the sides when you close the device.

6. Close the device and lock it with the latch so that it stays closed during the baking process.

Please note that the green power LED may alternately turn off and back on during the baking

process. If the green power LED illuminates, this indicates that the device is reheating to

maintain a constant temperature.

7. After approx. 5–6 minutes open the device to check whether the wafﬂ es have already been

baked to perfection or whether they need to be baked longer.

8. When the wafﬂ es are done, use wooden or plastic kitchen utensils to remove them to

prevent damage to the non-stick coating.

9. If you do not plan to bake any other wafﬂ es, pull the mains plug out of the socket and let the

device cool off completely before you remove and clean the plates and store them together

with the device.

Recipes

Porridge oat wafﬂ es with blueberries

Ingredients:

200 g ﬂ our

200 g porridge oats (kitten-soft)

½ pinch baking powder

½ TSP salt

1–2 TSP brown sugar

2 TBSP neutral cooking oil

½ TSP lemon juice

200 g. blueberries

approx. ½ L milk

1 egg