User manual

EN 18
Avoiding Damage to Material, Property and the Device
Always set up the device with a clear space on all sides (at least 20 cm) and clear
space above it (at least 30 cm) on a dry, at, solid and heat-resistant surface.
Maintain suf cient clearance from other sources of heat such as hotplates or stoves
in order to avoid damage to the device.
Make sure that the connected mains cable does not present a trip hazard. The cable
must not hang down from the surface on which the device is placed in order to pre-
vent the device from being pulled down. Never pull on the mains cable to move the
device.
Position the cable in such a way that it does not become squashed or bent and does
not come into contact with hot surfaces.
Do not expose the device to extreme temperatures, strong temperature uctuations,
direct sunlight or moisture.
The device must not be moved during operation.
Do not drop the device or allow it to be knocked violently.
Keep the device in a dry place at temperatures of between 0 and 40°C.
Use only the accessories included in the items supplied or recommended by the
manufacturer.
Never spray cold water onto the glass door of the device during or immediately after
use. The glass might shatter.
Always keep the glass door closed when the device is in use.
Do not place any heavy objects on the open glass door or the device.
Always place the used hot accessory, e.g. baking tray, on a heat-resistant surface.
Make sure that no food comes into contact with the heating elements. However, if
food should bake onto a heating element, pull out the mains plug and let the de-
vice cool down completely before removing it. Never use sharp or pointy objects like
knives or forks to do this.
Do not place food that is still packed in plastic wrap or plastic bags in the device.
Always allow the device to cool down completely before putting it away.
Notes on Hygiene
The device may contain production residues. In order to avoid health hazards, clean
the inside of the housing and all accessories thoroughly before initial use (see the
"Before Initial Use" and "Cleaning and Storage" chapters) and heat the device up for
15 minutes without any food in it.
Clean the device after every use and keep it clean to prevent the formation of germs.