Product Brochure

Description
ACT E10 autocirc lead-free
*
pump was designed with highly efcient electronically commutated permanent magnet motor
(ECM/PM technology) specically for potable water systems. This unique design is perfect for retrots and systems with tankless
water heaters. No recirculation pipe is required.
Control Mode
The ACT E10 is controlled by a timer and thermostat. A built-in temperature sensor automatically turns the pump ON when
the water temperature in the hot water supply line cools down to 89.6
º
F (32
º
C). The pump turns OFF automatically when water
temperature reaches 95
º
F (35
º
C), ensuring instant availability of warm water with hot water only seconds behind. The pump is also
equipped with 24 hour, adjustable timer to provide the most cost effective method of operation. The timer can be programmed
to run only during the time periods when hot water is most frequently required.
*
As dened, by CA AB1953. Less than 0.25% on wetted surface area. NSF certied.
6.76” (71.7mm)
5.85” (48.7mm)
1.61” (40.8mm)
5.97” (151.74mm)
5.19” (132mm)
2.32” (59mm)
3.98” (101mm)
Performance Curve of ACT E10 Pump
Specication
The contractor shall furnish and install hot water recirculation pumps as illustrated on the plans and in accordance
with the following specications:
1. The pumps shall be of the high efciency type specically designed for quiet operation
2. Pump to be suitable for 203
º
F (110
º
C) operation at 150 psig (10 Bar) working pressure and 115V, 60Hz, 1Phase power.
3. The pumps shall have a shaft-less, wet rotor design with a ceramic ball bearing lubricated by the system uid.
4. Pump to have built-in temperature sensor and 24-hour, adjustable timer
6. Motor shall be spherical with an electronically commutated, permanent magnet motor (ECM/PM).
7. Motor shall be non-overloading at any point on the pump curve and shall have built in overload protection
8. Pumps to have a capacity of____GPM at _____foot of head
9. All pumps to be supplied by Laing
Available Models
Part Number Control Mode Model
Power
Consumption
Weight
6050E7000 Temperature and Timer ACT E10 60 W 6.50 lb
Xylem Inc.
3878 S. Willow, Suite 104
Fresno, CA 93725
Tel: [phone] [phone]
Fax: [phone] [phone]
www.Laing-thermotech.com
Goulds is a registered trademark of Goulds Pumps, Inc. and is used
under license. © 2016 Xylem Inc. BR-26B June 2016
ACT E10
0 1 2 3 4 5 6
Head (FT)
Flow (GPM)
25
20
15
10
5
0