User Manual

1. Start with the hoverboard powered off.
2. Adjust the foot pedals until they are level with each other and the
ground.
3.Press and hold the power button for 10 seconds. The LED lights will
flash.
4.Press the power button to turn off.
5.Press the power button to turn on. The hoverboard will be calibrated
and ready for galactic adventures.
NOTE: You may have to repeat the above process multiple times in
order to fully reset and calibrate your hoverboard. For example, you
may have to go through the process 3 times in a row before the
calibration fully takes effect.
Troubleshooting: One of the most common solutions for
hoverboard issues is calibrating your board. Here are the steps
involved in hoverboard calibration: