User's Manual

1.Rotate open the wireless charger,raise the holder
and put the wireless charger in a suitable position.
2.Connect the charging line,turn on the power (it is
recommended to use the QC2.0-QC3.0 or PD
adapter, otherwise the fast charging function cannot
be achieved),The charger starts working.
3.This product mobile phone charging area and watch
charging area are equipped with magnetic suction
function, which can be automatically calibrated to
ensure that the charging device is aligned with the
charging area of the wireless charger. Put the device
with wireless charging function on the corresponding
position of the wireless charger. When the wireless
charger is in normal working state, the device will
show normal charging.
4.This product can also be divided into three modules
for separate use, each module is equipped with Type-
C interface, independent power supply.
Usage introduction