User guide

4" Elevations
TM
Wall Mount Installation Instructions
TRAHCGNITOOHSELBUORT
nimelborpehtetacol,noitidnocdoognimeesyehtfI.eludomni-emarfropmalehtotegamadelbis
ivynarofkcehC
.snoitcaevitcerrocdnasesuacelbissopfotsilgniwollofeht
motpmySesuaCelbissoPnoitcAevitcerroC
OTSLIAFPMAL
THGIL
dezigrenetonerutxifehtgnideeftiucriC·
noitcennocelud
omrotiucricnirorregniriW·
pmalytluaF·
tuptuotsallabroeniL·
tsallabytluaF·
wolooterutarepmettneibmA·
.dezig
renesitiucrictahterusneotesufrorekaerbtiucrickcehC·
erasnoitcennoctahterusneotxobecilpserutxifenimaxE·
.tcerroc
ylbareferp,pmalrehtonaetutitsbusdnapmalytluafehtevomeR·
lanigiroehtecalper,sthgilpmalehtfI.thg
ilotnwonksitahteno
.enowenahtiw
.egatlovtiucricnepokcehC.erutxiftaegatlovenilkcehC·
.ytiunitnoctiucrickc
ehC·
.snoitidnoclatnemnorivnegnitsixetsniagagnitartsallabkcehC·
TUOSEOGPMAL
GNITHGILRETFA
pmalytluaF· naht
rehtarmotpmyssihttibihxelliwpmalayllanoisaccO·
.pmalwenaetutitsbuS.thgilotgniliafylpmis
NOSELCYCPMAL
FFO
DNA
erutxifotesolcootsinoitalusnI·
hgihootegattawpmaL·
wolegatlovtuptuotsallaB·
)"3tsaelta(eludomdnuoramo
rfnoitalusnievomeR·
.gnisuohnideificepsegattawpmalllatsnI·
.egatlovtiucricnepokcehC.erutxifehttaegatlov
enilkcehC·
SEE FIGURES 5A & 5B. If desired,
additional drywall screws can be
installed through the lower inner
bracket holes and into mounting wall
(not provided).
4. With fixture adjusted and secured,
connect the ballast, source and
socket leads as required, using
wire-nuts provided in hardware kit.
5. Once connections are complete,
bundle connections above the
ballast and/or underneath the pivot
arm bracket.
6. Remove the side screws from the
secondary locking holes to drop
arm and reinstall into the primary
screw holes to lock arm in closed
position.
7. Slide canopy back over inner
bracket assembly and reinstall
upper and lower canopy screws.
INSTALLATION COMPLETE.
FIGURE 6.
Figure 5A
Part No. CJ520703
©2006 Gotham
4" Elevations
TM
Page 2 of 2
Figure 5B
Figure 6