Instructions

Since the device only supports 2.4G Wi-Fi connection,
please ensure that the mobile phone and the device
are connected under 2.4G Wi-Fi simultaneously.
What’s in the Box
At a Glance
1. Indicator Light
2. ON/OFF Button（Also Reset Button）
3. Two Independent Sockets
Smart Plug x 1
User Manual x 1
Parameters
Model: WP2
Input: 120V~, 50/60Hz 10A Max.
Rated Power: 1200W Max.
Main Features
APP ControlVoice Control
Family Share
No hub required
V0 fireproof materials
Schedule & Timer
Reset
Turn on the power, hold the Switch/Paring button for 5 seconds and let it go when
the socket starts blinking fast the reset is successful.
When the socket is in a new network environment, you need to restore the factory
settings, and then reconnect to the network.
Do not use this product in humid environments or outdoors. It’s for indoor use only.
Do not place this product near heating devices, such as microwave ovens, stoves,
or radiators.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapors and solvents.
Do not disassemble, modify, or repair your device, and ask help from the authorized
professionals for device malfunction.
Do not use the device when it is no longer working properly or visibly damaged.
Do not store the device for extended periods in poor ambient conditions.
Do not insert your device to another one.
Never use aggressive detergents such as alcohol or other chemical solutions
because these could damage the casing or even impair the functioning of the
product.
Note: The image shown in the manual is indicative only. If there is inconsistent
between the image and the actual product, the actual product shall govern.
Warnings and Precautions
Important!
Keep it out of the reach of children and pets.
4.02.000.0675 v1.0
WP2-gosund说明书/英文
105g哑粉纸 / 四色印刷（6折页）
90X35mm
1mm最大公差
Made in China
4.02.000.0675 v1.0
Smart Plug Instruction
WP2
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.