User Guide

All Rights reserved, No Spreading abroad without GOSUNCN Permission
59
GM500-U1G_A
Hardware Development Guide
Table 4-5 Averaged working current [1]
Parameter Condition
Typical Value（Bandwidth=10MHz）
Unit
LTE LTE FDD Band 2, Pout=23dBm 575 mA
LTE FDD Band 4, Pout=23dBm 530 mA
LTE FDD Band 5 ,Pout=23dBm 610 mA
LTE FDD Band 12,Pout=23dBm 630 mA
LTE FDD Band 13,Pout=23dBm 720 mA
LTE FDD Band 17, Pout=23dBm 600 mA
LTE FDD Band 25, Pout=23dBm 650 mA
LTE FDD Band 26, Pout=23dBm 700 mA
Table 4-6 Averaged working current [2]
Parameter Condition Typical Value Unit
WCDMA Band2, Pout=24dBm 532 mA
Band5, Pout=24dBm 526 mA
4.4.2. RF Output Power
The following table shows the RF output power of GM500-U1G_A module.
Table 4-7 Conducted RF Output Power
Frequency Max Min
LTE FDD Band 2 23±2.7dBm -39dBm
LTE FDD Band 4 23 ±2.7dBm -39dBm
LTE FDD Band 5 23 ±2.7dBm -39dBm
LTE FDD Band 12 23 ±2.7dBm -39dBm
LTE FDD Band 13 23 ±2.7dBm -39dBm
LTE FDD Band 17 23 ±2.7dBm -39dBm
LTE FDD Band 25 23 ±2.7dBm -39dBm
LTE FDD Band 26 23 ±2.7dBm -39dBm
WCDMA Band 2 24+1/-3 dBm -50dBm
WCDMA Band 5 24+1/-3 dBm -50dBm
4.4.3. RF Receiving Sensitivity
The following table shows the conducted RF receiving sensitivity typical value of GM500-U1G_A module.
Table 4-8 Conducted RF Receiving Sensitivity Typical Value [1]
Band
5 MHz(dBm)
10 MHz(dBm)
20 MHz(dBm)
LTE FDD Band 2 -98 dBm -95 dBm -92 dBm
LTE FDD Band 4 -100 dBm -97 dBm -94 dBm
LTE FDD Band 5 -98 dBm -95 dBm /
LTE FDD Band 12 -97 dBm -94 dBm /
LTE FDD Band 13 -97 dBm -94 dBm /