Operating Instructions MAVOSPEC Communication Protocol 1/07.
The communication protocol between MAVOSPEC and GL SpectroSoft is based on Extensible Markup Language (XML). The MAVOSPEC listens for incoming connections on TCP port 13000. Only one TCP connection at the time is possible. When MAVOSPEC is connected to the PC via USB, an additional tool must be used to provide port forwarding. The tool is installed on the disk together with SpectroSoft. Following command creates TCP server port 13000 on PC ready for accepting connection to MAVOSPEC.
Attribute name: "integrationTime" - sets integration time to be used by MAVOSPEC during measurement. The min and max attributes contain the defined range of allowed values for the integration time and cannot be changed. "repeatCount" - sets the number of measurement repetitions. The measurement result send to the PC is the average over the given number of measurements.
Example of message sent to MAVOSPEC to disable automatic mode, set integration time to 5000 and make average of 10 measurements: PAGE 5Tag: Direction: MAVOSPEC → PC progress This message informs PC about measurement progress. The value contains % of progress. Example: Tag: Direction: MAVOSPEC → PC notification Notification about changes in state warnings or errors in MAVOSPEC. The type describes the level of importance.
19.647692307692306 716.887 00000000 31.3125 19.648 10615.
86.298543 61.723985 -0.831876 75.985319 73.022323 71.083260 77.265477 95.
Printed in Germany – Subject to change without notice GOSSEN Foto- und Lichtmesstechnik GmbH I Lina-Ammon-Str.22 I D-90471 Nürnberg I Germany Telefon: +49 911 8602-181 I Fax: +49 911 8602-142 I E-Mail: info@gossen-photo.de www.gossen-photo.
