Datasheet

1514
DIGISKY
Specifications
Ergonomic design – highly practical one-hand operation, function selection
via the diffuser ring, easy, intuitive navigation and menu settings with the ring
controller and just a few keys.
Brilliant display – large TFT color graphic display with excellent legibility even
in the dark, clear-cut menu structure and complete information at a glance.
Multilingual operation –
menu language can be switched to German or English.
Comprehensive metering methods – incident and reflected light measure-
ment with spherical or flat diffuser and adjustable measured value display in
full, 1/2 or 1/3 increments.
Flexible ambient light measurement – aperture or shutter priority pre-
selection with exposure value display and additional digital and analog dis-
play of measured value deviation from the selected exposure level.
Contrast range control – measurement of subject and lighting contrast, dis-
play of minimum, maximum and mean values for preselected f-stop/shutter
speed combinations.
Comprehensive flash measurement – flash exposure measurement (cord/
non-cord/radio) with adjustable synchronization speed, display of flash ratio
and Elinchrom Skyport/Skyspeed compatible radio module.
Convenient Elinchrom control – assignment of 4 flash groups to 8 different
radio frequencies, separate and combined triggering, remote controlled flash
power.
CINE function for filmmakers – determination of f-stop for film speeds
ranging from 2 to 1000 fps and open aperture angles from 45° to 315°,
measurement of illuminance or luminance.
Individualized correction –
entry of correction values: EV ± 5 in 1/10 increments.
Dynamic change – amongst various cameras by means of presettings and
selection of 3 camera profiles and a filmmaking profile.
Ideal CINE Meter for Filmmakers
Film speed, open aperture angle, photometry settings and a correction factor
for filters can be specified in the movie mode. The exposure value appears
in an easy to interpret analog scale allowing for immediate detection of
even minimal deviation from the desired illuminance, and additionally as a
digital value. The large digital display can be switched back and forth
between measured aperture and illuminance or luminance. Middle, minimum
and maximum values for the f-stop, as well as minimum and maximum
photometric values can be queried by pressing the DATA key. The camera-
man is thus provided with a clear-cut display of all of the values required for
a correctly exposed image.
Perfect Ergonomics
The lightweight, handy DIGISKY is laid out for convenient one-hand
operation. It can be easily and intuitively operated with the help of the ring
controller and just a few clear-cut keys. The 2.2" color graphic display is
highly legible in both light and dark settings and allows for the representation
of a clearly arranged menu structure with all information is available at a
glance. Settings for three individually selectable camera profiles and a
filmmaking profile can be entered in the setup menu, where display
brightness, display on-time and device on-time can be changed as well, and
the menu language can be set to either German or English. In keeping with
the times, power is supplied by a rechargeable lithium-ion battery which is
recharged via the USB port using the included power pack. The software
can also be updated via the port, assuring that the DIGISKY is fully up to
date even after years of use. Thanks to its compact, low-profile design and
minimal weight, it can be tucked away into any shirt or pants pocket and is
always on the set when needed.