Datasheet

1110

DIGIPRO F2

Universal Exposure Meter for Photographers

Ambient light measurement can be performed with either aperture or shutter

priority pre-selection, as well as with exposure values. The removable diffuser

can be used to switch back and forth between incident and reﬂected light

measurement. After measurement has been completed, f-stop/shutter speed

combinations can be queried by pressing the value keys. Measured values

are displayed digitally in 1/10 increments, and f-stop values appear at the

analog scale in 1/2 increments. If the measuring key is pressed and held

in the shutter pre-selection and exposure value function, contrast range is

ascertained and displayed at the f-stop scale – an ideal function for matching

the subject’s contrast range to the recording medium.

In the case of ﬂash measurement, this can be triggered manually,

wirelessly or by means of a synchronizing cable. After measurement has

been completed, the f-stop value for the speciﬁed synchronizing speed

appears at the display. This is displayed at the analog f-stop scale along with

the f-stop value for the ambient light ratio. The relationship between ﬂash and

ambient light can be inﬂuenced by changing synchronization speed, making

it possible to adjust ﬁll-in ﬂash or soften ambient light. If the measurement

indicates that the desired working aperture is not possible with a single ﬂash,

it can be adjusted with the upper value key. The digital time display is then

replaced with an indicator showing the number of ﬂashes required for the

working aperture.

Simple CINE Meter for Filmmakers

Film speed is speciﬁed in the CINE mode. An open aperture angle which

deviates from 180° can be taken into account by calculating and entering

the ﬁlter factor as a correction value (COR). After measurement has been

completed, the f-stop value is displayed digitally in 1/10 increments and

appears additionally at the analog f-stop scale rounded off to 1/2 incre-

ments. The cameraperson is thus provided with basic data for a correctly

exposed image.

Ergonomic Design

The DIGIPRO F2 is laid out for convenient one-hand operation. Operation

is simple and intuitive with just a few keys. The high-contrast LCD panel

is highly legible and displays values in a clear-cut fashion. Measuring and

display direction can be ideally adapted to individual requirements with the

swivel head. Its compact, but nevertheless rugged design, assures that the

exposure meter ﬁts into the user’s hand perfectly and accompanies the

photographer through all of his tasks as an indispensable tool.