User manual

16 Gossen Foto- und Lichtmesstechnik GmbH
4.4 Setting Correction Factors
As many as two different correction factors can be entered to the MAVO-SPOT 2.
• As default values, Corr1 is set to a factor of 1.000 (no correction) and Corr2 to a factor of 3.142 (illuminance
measurement with GOSSEN reflection standard, optional accessory).
Press the
key to select the Corr function.
• Select the desired correction factor with the MFK (visible at the top of the display).
• While setting the factor, any measured value shown in the display is correspondingly adjusted (visible at the
bottom of the display).
• You can switch back and forth between correction factors 1 and 2 with the
key.