DIGISKY Quick-start Guide – 15448 – V1.18 Essentials Preparations required for use of the exposure meter and its basic functions are described in these instructions. Please check that the exposure meter and accessories as detailed below are included in the box. If the contents are incomplete, please contact your local dealer.
How to insert and charge the battery The DIGISKY works with a device-specific, rechargeable lithiumion battery. Use the V070A rechargeable battery and the USB battery charger included with the exposure meter. In order to insert the rechargeable battery, it is necessary to have a (Philips) recessed head screwdriver. Switch your DIGISKY off or wait until the exposure meter is switched off automatically.
Meter Overview Diffuser ring for incident light/ reflected light measurement, off Meter cell f. reflected light measurement Incident light Spherical diffuser User Cam 1 Cam 2 Cam 3 Movie Retractable diffuser head f.
Switching the DIGISKY on after: Standby (display off) Automatic switching OFF Manual switching OFF Measuring Modes Activate by pressing any key or turning the instrument head Activate with menu key only Turn instrument head to measurement modes Function Selection: Ambient Light / Flash Light Use the menu key ... to select a function. Spherical incident light measurement RF Function Selection: All / Group . Reflected light meas. Flat incident light meas Off Use the data key ...
Ambient Light Use the ring controller ... Use the ring controller ... to set time / f-stop to select the desired value. Press the measurement key to make a measurement. Contrast measurement: press and hold the measurement key. Contrast measurement: use the data key to display the average, minimum and maximum value.
Flash light Use the ring controller ... RF Use the data key ... to select the desired group. to select the desired synchronization speed. Press the measurement key ... NonCord Approx. 45 seconds measurement standby duty Cord Synchronizing cable – flash is triggered RF RF module – flash is triggered to perform a measurement.
Movie Settings (f-stop, sector angle, sensitivity etc.) are set in the main menu. EV analog display Use the menu key ... Measured value with correction Illuminance, luminance Shutter angle to switch the display from f-stop value to photometric value. CINE Speed Press the measurement key to perform a measurement. For continuous measurement: press and hold the measurement key; use data key to display the average, minimum and maximum value.
Main Menu Use the ring controller ... Press and hold menu key ... to select a user. to select a menu. to select a setting. Use the ring controller ... Press the measurement key ... to confirm. to select a submenu. Use the measurement key ... to exit the menu. to select a value.
FCC & IC - USA Modifications Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Conditions of Operations This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.
!! Displaying Documentation in PDF Format Adobe Reader or Adobe Acrobat Reader must be installed to your PC if you want to display product documentation in PDF format. If this software has not already been installed to your PC, it can be downloaded from the following website: http://www.adobe.com. This icon indicates that this product must be disposed of separately.
Store the measuring instrument at a location which cannot be accessed by children. The measuring instrument and its accessories include parts which can be swallowed. Make sure that these parts (e.g. housing covers, rechargeable batteries etc.) do not fall into the hands of children who might swallow them. Otherwise, danger of suffocation prevails. Use suitable cables only. Use only the included, original Gossen cables for connection to external devices. Gossen assumes no liability if other cables are used.
Subject to change without notice. GOSSEN Foto- und Lichtmesstechnik GmbH Lina-Ammon-Str.22 D-90471 Nuremberg, Germany Phone: +49 (0)911 / 8602-181 Fax: +49 (0)911 / 8602-142 http://www.gossen-photo.
